Skip to content

Sage sensors monitor environment, support ‘edge AI’

The video above, courtesy of the Sage project, shows the rapid deployment of an enviromental sensor and 30 foot ARE Telecom ballasted tower at the University of Utah's Taft-Nicholson Environmental Humanities Center in Lakeview, Montana.

Smokey Bear is mostly right — you can help prevent wildfires — but it’s not all on you. Using fire-resistant building materials, establishing vegetation-free “ignition zones,” and avoiding fire-related activities when it’s hot, dry, and windy are actions that, ideally, we all can take.

The U maintains Sage sensor nodes (L-R) at the Taft-Nicholson Center (image courtesy of Dan Reed); Rio Tinto Center (image courtesy of Natural History Museum of Utah staff); and 102 Tower (image courtesy of Tom Jennings). Select the image to enlarge.

The U maintains Sage sensor nodes (L-R) at the Taft-Nicholson Environmental Humanities Center (image courtesy of Dan Reed); Rio Tinto Center (image courtesy of Natural History Museum of Utah staff); and 102 Tower (image courtesy of Tom Jennings). Select the image to enlarge.

The scientific community, too, has a preventive role to play around natural disasters, urbanization, and climate change. Recent advances in this area, like attempts to predict fire behavior before it becomes unmanageable, are the result of an ambitious project to build a continent-wide network of intelligent sensors that monitor environmental changes.

The Sage project, of which the University of Utah is a partner institution, is a $9 million National Science Foundation (NSF)-funded initiative launched in 2019 and led by researchers at Northwestern-Argonne Institute of Science and Engineering (NAISE), a collaboration between Northwestern University and the U.S. Department of Energy’s Argonne National Laboratory. Other Sage partners include the University of Colorado, the University of California-San Diego, Northern Illinois University, and George Mason University.

Dan Reed, Ph.D., professor of computational science, chair of the National Science Board, and Sage project chief architect

Dan Reed, Ph.D., professor of computational science, chair of the National Science Board, and Sage project chief architect

“Sage is next-generation software infrastructure that’s flexible enough to accommodate both urban and environmental monitoring,” said Dan Reed, Ph.D., professor of computational science at the U; chair of the National Science Board (NSB), the NSF’s policymaking body; and the Sage project’s chief architect

Manish Parashar, Ph.D., director of the U’s Scientific Computing and Imaging (SCI) Institute, meanwhile, is overseeing an effort to write code for scheduling and analysis functions on the three U-maintained sensor nodes — one at the Taft-Nicholson Environmental Humanities Center in Lakeview, Montana; one atop 102 Tower in downtown Salt Lake City; and one on the roof of the Rio Tinto Center, which houses the Natural History Museum of Utah (NHMU).

When Reed presented the project to the U’s Council of Academic Deans, NHMU Executive Director Jason Cryan said he “immediately put up my hand to offer NHMU as a potential first installation site for Utah.”

The idea behind Sage is to move advanced machine learning algorithms to “edge computing.” The traditional method involved deploying sensors and collecting data later. Previous systems might save data on hard drives retrieved from sensors a few times a year or upload only a fraction of data to a cloud server through a slow wireless connection. Edge computing, on the other hand, allows data to be analyzed and measured almost immediately, by instruments near or at the data collection site. Sage devices, Reed explained, process images, sound, vibration, and other data to create measurements that can’t be as easily obtained from conventional sensor networks.

Scientists from Argonne National Laboratory conduct experiments with a Sage monitoring system near a controlled burn in the Konza prairie in Kansas (image by Rajesh Sankaran, Argonne). Select the image to enlarge.

Scientists from Argonne National Laboratory conduct experiments with a Sage monitoring system near a controlled burn in the Konza prairie in Kansas. Select the image to enlarge. (Image by Rajesh Sankaran, Argonne)

The Sage project relies heavily on lessons learned from the Array of Things (AoT) project, part of the smart cities initiative announced in 2015 by former President Barack Obama. AoT leverages an open-source intelligent sensing and edge computing platform called Waggle, developed at Argonne National Laboratory.

Primarily funded by the NSF, AoT was a collaborative effort among scientists, universities, federal and local government, industry partners, and communities to collect real-time data on urban environments. AoT was the brainchild of Charlie Catlett, a senior computer scientist in Argonne’s Mathematics and Computer Science (MCS) Division, Sage co-principal investigator, and Reed’s longtime friend and colleague.

Catlett’s vision was to create a “fitness tracker for the city”: a vast network of low-cost sensors placed throughout Chicago capable of measuring everything from urban heat islands to noise pollution. 

“When you think about the way we’ve traditionally done social science, people go out and conduct surveys. When you survey people, they sometimes say what they think you want to hear,” Reed said. “It’s a little like your doctor advising you to eat a better-balanced diet and exercise more, which ends up being a promise most of us make and break the moment we leave the doctor’s office. With AoT, the idea became, instead of surveys, why don’t we just measure what really happens?”

Screenshot of a dashboard displaying real-time data from the U's Sage sensor node located at the Taft-Nicholson Center in Lakeview, Montana.

Screenshot of a dashboard displaying real-time data from the U's Sage sensor node located at Taft-Nicholson Center in Lakeview, Montana. Select the image to enlarge.

Reed said getting the AoT project off the ground required a considerable amount of civic discussion over the acceptable use of data “because putting cameras up in the middle of the city doesn’t exactly inspire faith in the community.”

“One of the agreed-upon rules was that raw imagery would never leave the cameras, only derived and anonymized statistics,” Reed said. “The other realization was that the volume of data is too large to push back to the central site, so being able to do edge AI lowered the bandwidth requirements while allowing greater privacy.”

Sage cyberinfrastructure links small, powerful computers directly to nodes, most of which feature high-resolution cameras (including a thermal camera), microphones, weather measurements, and air quality sensors, and sends the information back to central servers. The distributed system allows researchers to analyze and respond to enormous amounts of data quickly, without having to transfer it all back to the laboratory.

Though Sage devices are intended to measure environmental changes locally and regionally, sensors are often sensitive enough to detect changes thousands of miles away. For example, Reed said Sage sensors detected the air pressure wave from a volcanic eruption in Tonga that produced the largest atmospheric explosion in recorded history.

In addition to U-maintained nodes, Sage technology continues to be tested in AoT environments; the University of California-San Diego’s WIFIRE project, which provides real-time wildfire prevention and response data at about 80 towers across southern California; and the NSF’s National Ecological Observatory Network (NEON), an array of hundreds of terrestrial and aquatic measurement sites across the United States that collects data on plants, animals, soil, water, and the atmosphere.

“NEON provides expert ecological data from sites across the continent to power the most important science being done today,” Reed said. “NEON is essential to tracking and understanding how human activities impact local flora and fauna as the environment has shifted.”

A brief overview of Sage sensor nodes (source: Dan Reed)

The infrared view from a camera mounted on the Sage sensor node at the Taft-Nicholson Center.

The infrared view from a camera mounted on the Sage sensor node at Taft-Nicholson Center. Select the image to enlarge.

  • Each node runs on wireless or wired ethernet connections, or Starlink, the highest-bandwidth option at the Taft-Nicholson Center.
  • The nodes periodically send data back to the Waggle platform and other Argonne-hosted infrastructure.
  • A dashboard of real-time information displays still images recorded by a top and bottom camera, infrared views, 30-second audio snippets, and environmental conditions, such as pressure, temperature, and humidity.
  • Sensors are managed by Raspberry Pi microcontrollers and a Nvidia graphics processing unit (GPU)-powered AI engine, with plug-in connectors capable of supporting additional sensors.
  • Code can be scheduled to run on nodes.
  • The nodes accomplish myriad environmental monitoring tasks, from detecting changes in air quality and weather patterns to recognizing different species of birds and their migratory habits.

Reed is also excited about Sage’s potential for “engaging K-12 students in real citizen science.” 

“The nodes have places where young people can plug in low-cost sensors of their own,” Reed said. “Just imagine students interacting with this technology, too, getting excited by the notion that they can do real science, write code, build sensors, and capture data in real time, instead of just reading examples in a textbook.”

Share this article:

 

Node 4

Our monthly newsletter includes news from UIT and other campus/ University of Utah Health IT organizations, features about UIT employees, IT governance news, and various announcements and updates.

Subscribe

Categories

Featured Posts

Last Updated: 10/27/22